200L STRIPPER FLOOR POLISH REMOVER - (STRIP200)
Product Links
Attention If you are an account holder, please login to see addition information.
Purchase 200L STRIPPER FLOOR POLISH REMOVER online from Arnold Products Limited.
$1,057.69 Inc. GST
Brief Description
FLOOR POLISH REMOVER
Technical Notes
PRODUCT DESCRIPTION
- Arnold’s Stripper is a powerful cleaner designed to strip old polish of floors prior to re-application. After many coats of polish have been applied a floor begins to get a rough build up of wax and dirt. At this stage the floor needs to be stripped back to the original material and new polish re-applied. Stripper is designed to dissolve to the waxes and other ingredients that make up the polish.
- Can be used diluted for a partial cut back.
DIRECTIONS
- Application - mop on and leave for 10-20min to soften polish and buff off with a wetted eager beaver pad for smaller areas or a round buffing pad on a polishing machine (we don’t have these but the can be hired from Hire-Quip) for larger areas (green pad to be used) Green buffing pads for small areas can be used with either a hand held blue holder or one that attaches to a handle.
- Wash with a neutral detergent like Arnolds Quick before commencing to re-apply polish. Ask Arnolds for the Polish Guide Notes.
- Vectra polish is then to be re-applied to the lino (preferably in warmer weather)
- Dilute 1 litre Stripper in 10 litres Hot Water for normal stripping.
- Dilute 250 mls Stripper in 10 litres of Hot water for a partial strip.
- Dilute 2.5 litres into 10 litres Hot water for a heavily contaminated floor.
- A second application may be required where heavy areas are mixed with light areas.
PRECAUTIONS
- Store in original container.
- Do not mix with other chemicals.
- Rinse container when finished, recycle where possible.
- Keep out of reach of children
WARNINGS
- Harmful if ingested.
FIRST AID
- Ingestion: drink 1-2 glasses of water. Seek medical advice. Do not Induce vomiting. Do not give anything by mouth to an unconscious or convulsing patient.
- Skin Contact: rinse with cold water for 15 minutes and seek medical advice if irritation persists.
- Eye contact: flush with cold water for 15 minutes and seek medical advice if irritation persists.
- Inhalation: remove from further exposure. Seek medical advice if discomfort continues.
- Spillage: contain spillage with absorbent and dispose in accordance with local regulations.
